Server Online
Server Online

Advisory 2026-11/05 PHP Security Release (CVE-2026-115560 and Others)

Vulnerability Type

Several PHP vulnerabilities have been fixed fixed, including a session-related remote code execution vulnerability (CVE-2026-115560).

Severity factors

PHP rates the most serious issues critical (CVSS 9.2). However, PHP states that these need a non-default configuration or an uncommon setup, which is not the case in FileCloud 23.263.3, and therefore, none of the vulnerabilities can be exploited on a default 23.263.3 server.

Versions earlier than 23.263.3 have session upload progress turned on by default, so those customers should turn it off (see Interim mitigation).

Versions affected

All FileCloud Server versions up to and including 23.263.3, on Windows and Linux. 23.263.3 bundles PHP 8.4.27, which is in the affected range, so vulnerability scanners will report it.

Version fixed

To be released (FileCloud 23.264, due December 2026, bundling PHP 8.5.13).

Description

On , PHP released PHP 8.5.13, 8.4.28, 8.3.37 and 8.2.36. These releases fix 14 vulnerabilities across all supported PHP versions. The most serious can allow remote code execution, but only with a non-default PHP configuration or an uncommon setup.

FileCloud bundles PHP. 23.263.3 bundles PHP 8.4.27, which is in the affected range.

We reviewed every vulnerability against FileCloud. None can be exploited on a default FileCloud installation:

  • Session vulnerabilities (CVE-2026-115560, CVE-2026-126714, CVE-2026-129481): these need specific PHP session settings that FileCloud does not use. The feature they rely on (session.upload_progress) is turned off by default from FileCloud 23.263.3. In earlier versions it is turned on by default, so customers on those versions should turn it off.

  • Timezone cache vulnerability (CVE-2026-129496): this needs a specific PHP build type that writes startup errors to a log file. FileCloud's default Linux configuration does not write startup errors to a log file. FileCloud on Windows uses a different PHP build type from the one affected, and no startup errors were found in its log.

  • PHP-FPM and PHP-CGI vulnerabilities (CVE-2026-129289, CVE-2026-129291, CVE-2026-129292, CVE-2026-129538): these affect only PHP-FPM or PHP-CGI. FileCloud runs PHP inside Apache, which is not affected.

  • The other vulnerabilities (CVE-2026-128064, CVE-2026-127960, CVE-2026-128090, CVE-2026-129501, CVE-2026-129506, CVE-2026-15353): these need PHP features that FileCloud does not use, such as PHAR archives, a SOAP server or the new DOM API, or a connection to a server controlled by an attacker. FileCloud only connects to trusted servers.

The protection depends on FileCloud's default PHP settings. If you run a version earlier than 23.263.3, or if these settings were changed, follow the interim mitigation below.

Interim mitigation

Versions earlier than 23.263.3: session.upload_progress.enabled is turned on by default. Turn it off using the steps below.

23.263.3: session.upload_progress.enabled is already turned off by default, so no action is needed if you use the default PHP settings. If you changed PHP settings, use the steps below to check that the PHP configuration used by Apache still has these values:

  • session.upload_progress.enabled is Off on all platforms

  • error_log has no value on Linux; leave the Windows default as it is

Apply the steps on every server that runs FileCloud 23.263.3 or earlier, until you upgrade to FileCloud 23.264.

Windows

Interim mitigation steps for Windows
  1. Open a command prompt and run:

    C:\xampp\php\php.exe -c C:\xampp\php\php.ini -i | findstr "session.upload_progress.enabled"
    findstr "session.upload_progress" C:\xampp\htdocs\.htaccess
    

    The first command should show session.upload_progress.enabled => Off => Off. The second command should show nothing.

  2. If the first command shows On, open C:\xampp\php\php.ini in a text editor and set:

    session.upload_progress.enabled = 0
    

    If the second command shows a line, remove that line from .htaccess.

  3. Restart Apache from the FileCloud Control Panel or from Windows Services.

Linux

Interim mitigation steps for Linux

Run these commands as root.

  1. Check the values PHP uses:

    Bash
    # Ubuntu: find the PHP version Apache uses (for example, php8.4.load)
    ls /etc/apache2/mods-enabled/ | grep php
    
    # Ubuntu: check the settings (replace 8.4 with the version above)
    PHP_INI_SCAN_DIR=/etc/php/8.4/apache2/conf.d php8.4 -c /etc/php/8.4/apache2/php.ini -i | grep -E "session.upload_progress.enabled|^error_log"
    
    # RHEL
    php -i | grep -E "session.upload_progress.enabled|^error_log"
    
    # Ubuntu and RHEL: check FileCloud's .htaccess file
    grep -E "session.upload_progress|error_log" /var/www/html/.htaccess
    

    The settings check should show:

    JavaScript
    session.upload_progress.enabled => Off => Off
    error_log => no value => no value
    

    The .htaccess check should show nothing.

  2. If session.upload_progress.enabled shows On, set it to 0 in php.ini. If error_log shows a value, comment out the error_log line in php.ini by adding ; at the start. If the .htaccess check shows a line, remove that line.

  3. Restart Apache:

    # Ubuntu
    systemctl restart apache2
    
    # RHEL
    systemctl restart httpd
    

Deployment notes

  • Single-server installations: On 23.263.3, no action is required if the settings match FileCloud's defaults. On earlier versions, apply the steps.

  • Multitenant deployments: All tenants share the same PHP configuration, so the steps only need to be applied once on each server.

  • High availability deployments: Apply the steps on every FileCloud web/app node. To avoid an outage, restart Apache on one node at a time.

  • FileCloud Online: No action is required.

Fix

  • FileCloud Server up to and including 23.263.3: We recommend upgrading to 23.264 when it is released (due December 2026). It bundles PHP 8.5.13. In a high availability deployment, upgrade one web/app node at a time so that the service stays available.

  • Do not upgrade PHP separately. FileCloud is tested with the PHP version it bundles, and other versions may affect how FileCloud works.

  • FileCloud Online: No action is required.

If you have any questions about this advisory, please contact FileCloud support.

References